If you’re the kind of person who loves to grill and also loves home projects, then you might look in to making sawdust charcoal. If you’re into carpentry, there’s a good chance you’ll have tons of sawdust laying around anyway. You might as well save a bit of money by turning that sawdust into a usable resource! There is good sawdust charcoal making machine supplier for you – Beston.
Tools You’ll Need to Make Sawdust Charcoal
To transform sawdust into charcoal, you’ll need a few tools. Two metal cans with matching metal lids, one 30 gallons in size and the other 15 gallons in size, are the primary tools. A drill with both a 1 inch drill bit and a 1/8 inch drill bit are also needed.
In addition, you’ll need a few bricks. Two or three should work fine. You’ll also need 1/8 inch nails, matches, a measuring tape and a charcoal storage bag.
How to Make Charcoal from Sawdust: Step by Step
The first few steps are uncomplicated. Place the 30 gallon can on a non-flammable and flat surface, ideally gravel or open dirt. Take off the lid and then drill eight 1 inch holes. Make sure to space them evenly around the can circumference on the side, three inches above the bottom. Then put one of the bricks, wide side facing up, in the middle of the can.
How to Make Sawdust Charcoal: The Second Can
Then it’s time to work on the second can. Drill four holes into the 15 gallon can in a square shape. You want to place them half an inch from the edge of the lid. From there, pour the sawdust into the 15 gallon can, leaving at least half an inch of space empty on the top. The charcoal production line is useful to turn waste into energy.
Wearing fireproof gloves, strike a match and light up multiple areas of the sawdust until it catches fire. Then put the lid of the 15 gallon can back on. Make absolutely certain to wear safety gear for this. While you may have a steady hand, you never know when an accident might happen. You can’t plan a random event, after all.
From there, insert the 15 gallon can into the 30 gallon can, with the 15 gallon can centered on top of the brick. Let the sawdust burn until smoke stops coming out of the 15 gallon can. After that, take the 15 gallon can out of the 30 gallon can, then put 1/8th inch nails into the four holes in the 15 gallon can’s lid to seal it up.
The final step is to allow the 15 gallon can to cool for three hours. Once that’s done, all that’s left to find a place to store the fresh out of the burner charcoal, ideally the waterproof storage bag mentioned above.
Watch the sawdust charcoal making machine video below and you will learn about the process in details: